IMU¶

IMU (intertial measurement unit) node can be used to receive data from the IMU chip on the device. Our DepthAI devices use BNO085 9-axis sensor (datasheet here) that supports sensor fusion on the (IMU) chip itself. The IMU chip is connected to the Myriad X (VPU) over SPI (we have integrated this driver to the DepthAI).

How to place it¶

pipeline = dai.Pipeline()
imu = pipeline.create(dai.node.IMU)

dai::Pipeline pipeline;
auto imu = pipeline.create<dai::node::IMU>();

Inputs and Outputs¶

┌──────────────┐
│              │
│              │      out
│     IMU      ├─────────►
│              │
│              │
└──────────────┘

Message types

out - IMUData

Maximum frequencies¶

Maximum output frequencies are 500 Hz raw accelerometer, 1000 Hz raw gyroscope values individually, and 500 Hz combined (synced) output. You can obtain the combined (synced) 500 Hz output with imu.enableIMUSensor([dai.IMUSensor.RAW_ACCELEROMETER, dai.IMUSensor.RAW_GYROSCOPE], 500).

Usage¶

pipeline = dai.Pipeline()
imu = pipeline.create(dai.node.IMU)

# enable RAW_ACCELEROMETER and RAW_GYROSCOPE at 100 hz rate
imu.enableIMUSensor([dai.IMUSensor.RAW_ACCELEROMETER, dai.IMUSensor.RAW_GYROSCOPE], 100)
# above this threshold packets will be sent in batch of X, if the host is not blocked and USB bandwidth is available
imu.setBatchReportThreshold(1)
# maximum number of IMU packets in a batch, if it's reached device will block sending until host can receive it
# if lower or equal to batchReportThreshold then the sending is always blocking on device
# useful to reduce device's CPU load  and number of lost packets, if CPU load is high on device side due to multiple nodes
imu.setMaxBatchReports(10)

dai::Pipeline pipeline;
auto imu = pipeline.create<dai::node::IMU>();

// enable RAW_ACCELEROMETER and RAW_GYROSCOPE at 100 hz rate
imu->enableIMUSensor({dai::IMUSensor::RAW_ACCELEROMETER, dai::IMUSensor::RAW_GYROSCOPE}, 100);
// above this threshold packets will be sent in batch of X, if the host is not blocked and USB bandwidth is available
imu->setBatchReportThreshold(1);
// maximum number of IMU packets in a batch, if it's reached device will block sending until host can receive it
// if lower or equal to batchReportThreshold then the sending is always blocking on device
// useful to reduce device's CPU load  and number of lost packets, if CPU load is high on device side due to multiple nodes
imu->setMaxBatchReports(10);

IMU devices¶

List of devices that have an IMU sensor on-board:

IMU sensors¶

When enabling the IMU sensors (imu.enableIMUSensor()), you can select between the following sensors:

ACCELEROMETER_RAW
ACCELEROMETER
LINEAR_ACCELERATION
GRAVITY
GYROSCOPE_RAW
GYROSCOPE_CALIBRATED
GYROSCOPE_UNCALIBRATED
MAGNETOMETER_RAW
MAGNETOMETER_CALIBRATED
MAGNETOMETER_UNCALIBRATED
ROTATION_VECTOR
GAME_ROTATION_VECTOR
GEOMAGNETIC_ROTATION_VECTOR
ARVR_STABILIZED_ROTATION_VECTOR
ARVR_STABILIZED_GAME_ROTATION_VECTOR

Here are descriptions of all sensors:

class depthai.IMUSensor

Available IMU sensors. More details about each sensor can be found in the datasheet:

https://www.ceva-dsp.com/wp-content/uploads/2019/10/BNO080_085-Datasheet.pdf

Members:

ACCELEROMETER_RAW : Section 2.1.1

Acceleration of the device without any postprocessing, straight from the sensor. Units are [m/s^2]

ACCELEROMETER : Section 2.1.1

Acceleration of the device including gravity. Units are [m/s^2]

LINEAR_ACCELERATION : Section 2.1.1

Acceleration of the device with gravity removed. Units are [m/s^2]

GRAVITY : Section 2.1.1

Gravity. Units are [m/s^2]

GYROSCOPE_RAW : Section 2.1.2

The angular velocity of the device without any postprocessing, straight from the sensor. Units are [rad/s]

GYROSCOPE_CALIBRATED : Section 2.1.2

The angular velocity of the device. Units are [rad/s]

GYROSCOPE_UNCALIBRATED : Section 2.1.2

Angular velocity without bias compensation. Units are [rad/s]

MAGNETOMETER_RAW : Section 2.1.3

Magnetic field measurement without any postprocessing, straight from the sensor. Units are [uTesla]

MAGNETOMETER_CALIBRATED : Section 2.1.3

The fully calibrated magnetic field measurement. Units are [uTesla]

MAGNETOMETER_UNCALIBRATED : Section 2.1.3

The magnetic field measurement without hard-iron offset applied. Units are [uTesla]

ROTATION_VECTOR : Section 2.2

The rotation vector provides an orientation output that is expressed as a quaternion referenced to magnetic north and gravity. It is produced by fusing the outputs of the accelerometer, gyroscope and magnetometer. The rotation vector is the most accurate orientation estimate available. The magnetometer provides correction in yaw to reduce drift and the gyroscope enables the most responsive performance.

GAME_ROTATION_VECTOR : Section 2.2

The game rotation vector is an orientation output that is expressed as a quaternion with no specific reference for heading, while roll and pitch are referenced against gravity. It is produced by fusing the outputs of the accelerometer and the gyroscope (i.e. no magnetometer). The game rotation vector does not use the magnetometer to correct the gyroscopes drift in yaw. This is a deliberate omission (as specified by Google) to allow gaming applications to use a smoother representation of the orientation without the jumps that an instantaneous correction provided by a magnetic field update could provide. Long term the output will likely drift in yaw due to the characteristics of gyroscopes, but this is seen as preferable for this output versus a corrected output.

GEOMAGNETIC_ROTATION_VECTOR : Section 2.2

The geomagnetic rotation vector is an orientation output that is expressed as a quaternion referenced to magnetic north and gravity. It is produced by fusing the outputs of the accelerometer and magnetometer. The gyroscope is specifically excluded in order to produce a rotation vector output using less power than is required to produce the rotation vector of section 2.2.4. The consequences of removing the gyroscope are: Less responsive output since the highly dynamic outputs of the gyroscope are not used More errors in the presence of varying magnetic fields.

ARVR_STABILIZED_ROTATION_VECTOR : Section 2.2

Estimates of the magnetic field and the roll/pitch of the device can create a potential correction in the rotation vector produced. For applications (typically augmented or virtual reality applications) where a sudden jump can be disturbing, the output is adjusted to prevent these jumps in a manner that takes account of the velocity of the sensor system.

ARVR_STABILIZED_GAME_ROTATION_VECTOR : Section 2.2

While the magnetometer is removed from the calculation of the game rotation vector, the accelerometer itself can create a potential correction in the rotation vector produced (i.e. the estimate of gravity changes). For applications (typically augmented or virtual reality applications) where a sudden jump can be disturbing, the output is adjusted to prevent these jumps in a manner that takes account of the velocity of the sensor system. This process is called AR/VR stabilization.

Examples of functionality¶

Reference¶

class depthai.node.IMU

IMU node for BNO08X.

class Connection: Connection between an Input and Output

class Id: Node identificator. Unique for every node on a single Pipeline

enableIMUSensor(*args, **kwargs)

Overloaded function.

enableIMUSensor(self: depthai.node.IMU, sensorConfig: depthai.IMUSensorConfig) -> None

Enable a new IMU sensor with explicit configuration

enableIMUSensor(self: depthai.node.IMU, sensorConfigs: List[depthai.IMUSensorConfig]) -> None

Enable a list of IMU sensors with explicit configuration

enableIMUSensor(self: depthai.node.IMU, sensor: depthai.IMUSensor, reportRate: int) -> None

Enable a new IMU sensor with default configuration

enableIMUSensor(self: depthai.node.IMU, sensors: List[depthai.IMUSensor], reportRate: int) -> None

Enable a list of IMU sensors with default configuration

getAssetManager(*args, **kwargs)

Overloaded function.

getAssetManager(self: depthai.Node) -> depthai.AssetManager

Get node AssetManager as a const reference

getAssetManager(self: depthai.Node) -> depthai.AssetManager

Get node AssetManager as a const reference

getBatchReportThreshold(self: depthai.node.IMU) → int: Above this packet threshold data will be sent to host, if queue is not blocked

getInputRefs(*args, **kwargs)

Overloaded function.

getInputRefs(self: depthai.Node) -> List[depthai.Node.Input]

Retrieves reference to node inputs

getInputRefs(self: depthai.Node) -> List[depthai.Node.Input]

Retrieves reference to node inputs

getInputs(self: depthai.Node) → List[depthai.Node.Input]: Retrieves all nodes inputs

getMaxBatchReports(self: depthai.node.IMU) → int: Maximum number of IMU packets in a batch report

getName(self: depthai.Node) → str: Retrieves nodes name

getOutputRefs(*args, **kwargs)

Overloaded function.

getOutputRefs(self: depthai.Node) -> List[depthai.Node.Output]

Retrieves reference to node outputs

getOutputRefs(self: depthai.Node) -> List[depthai.Node.Output]

Retrieves reference to node outputs

getOutputs(self: depthai.Node) → List[depthai.Node.Output]: Retrieves all nodes outputs

getParentPipeline(*args, **kwargs)

Overloaded function.

getParentPipeline(self: depthai.Node) -> depthai.Pipeline
getParentPipeline(self: depthai.Node) -> depthai.Pipeline

property id: Id of node

property out: Outputs IMUData message that carries IMU packets.

setBatchReportThreshold(self: depthai.node.IMU, batchReportThreshold: int) → None: Above this packet threshold data will be sent to host, if queue is not blocked

setMaxBatchReports(self: depthai.node.IMU, maxBatchReports: int) → None: Maximum number of IMU packets in a batch report

class dai::node::IMU : public dai::NodeCRTP<Node, IMU, IMUProperties>¶

IMU node for BNO08X.

Public Functions

IMU(const std::shared_ptr<PipelineImpl> &par, int64_t nodeId)¶: Constructs IMU node.

IMU(const std::shared_ptr<PipelineImpl> &par, int64_t nodeId, std::unique_ptr<Properties> props)¶

void enableIMUSensor(IMUSensorConfig sensorConfig)¶: Enable a new IMU sensor with explicit configuration

void enableIMUSensor(const std::vector<IMUSensorConfig> &sensorConfigs)¶: Enable a list of IMU sensors with explicit configuration

void enableIMUSensor(IMUSensor sensor, uint32_t reportRate)¶: Enable a new IMU sensor with default configuration

void enableIMUSensor(const std::vector<IMUSensor> &sensors, uint32_t reportRate)¶: Enable a list of IMU sensors with default configuration

void setBatchReportThreshold(std::int32_t batchReportThreshold)¶: Above this packet threshold data will be sent to host, if queue is not blocked

std::int32_t getBatchReportThreshold() const¶: Above this packet threshold data will be sent to host, if queue is not blocked

void setMaxBatchReports(std::int32_t maxBatchReports)¶: Maximum number of IMU packets in a batch report

std::int32_t getMaxBatchReports() const¶: Maximum number of IMU packets in a batch report

Public Members

Output out = {*this, "out", Output::Type::MSender, {{DatatypeEnum::IMUData, false}}}¶: Outputs IMUData message that carries IMU packets.

Public Static Attributes

constexpr const char *NAME = "IMU"¶

Got questions?

We’re always happy to help with code or other questions you might have.

IMU¶

How to place it¶

Inputs and Outputs¶

Maximum frequencies¶

Usage¶

IMU devices¶

IMU sensors¶

Examples of functionality¶

Reference¶

Got questions?

Community Discord

Discussion Forum

Email Support